ATI-TOKEN-STATION

The Token Controller is a high quality, low-cost access control device. The controller accepts only tokens and will reject coins. To combine monthly (contract parking) with token operation, a card reader can be added, either at the factory or in the field.

TECHNICAL DATA:
Housing Weather resistant heavy 14-gauge steel construction
Hinged front door with key lock
Mounts on pedestal for easy operation
Two (2) coats baked enamel finish
Token
Mechanism Single token acceptance (7/8" diameter, standard : 1" available)
NO power required
Environmental Operrating temperature: 00 F to 1100 F
Mechanical 14 1/4"High, 9 ½ Wide, 9" Deep
(360mm High, 240mm Wide, 230mm Deep)
Overall height on pedestal is 42" (1070mm)
Weight 20 Lbs. (9KG) -Pedestal
20 Lbs. (9KG) -Token
Options Token/Card controller combination (shown)

Token Station:
The housing shall be weather-resistant and constructed of heavy gauge steel, not less than 14 gauge. All seams and joints shall be electric bead welds.

The cabinet shall be finished with two (2) coats of primer, followed by two (2) coats of baked enamel to insure lasting beauty and protection.

The token slot shall be within easy reach of the automobile driver and shall be protected by an extended hood. A push button release shall be furnished for bent tokens.

A weather resistant access door shall be provided with a key lock to service the token receptacle area.

Key Benefits:
Inexpensive and easy to install.
No power required.
Ideal for free entrance (gate or traffic controller)and token exit applications for office buildings medical centers, etc.